Can I add wheels to my CosmoGlo Light?Updated 9 hours ago

About the CosmoGlo Wheel Kit

Just roll with it! - The CosmoGlo Wheel Kit is a custom upgrade designed exclusively for all CosmoGlo models, including Original and XL. It’s a simple way to add mobility, extra height, and increased stability to your light, with no tools required.

Key Benefits:

• Mobility: Easily roll your light around your treatment space

• Stability: Extra weight from the wheels helps keep your light grounded

• Added Height: Increases light height by 2.75 inches

• Easy Installation: Adhesive wheels apply directly to the base—no tools or replacements needed

• Locking System: Includes 2 regular wheels and 2 locking caster wheels to keep your setup secure

What’s Included:

• 2 locking swivel caster wheels

• 2 regular swivel caster wheels

• 4 alcohol wipes for surface prep

• 1 cord clip to keep your power cord secure

Before You Apply:

• Adding wheels increases the total height by 2.75". Make sure your setup has enough clearance with the added height, especially under beds or furniture.

• Wheels are a permanent modification. Once attached, they cannot be removed or repositioned.

• Let the adhesive fully cure for 24 hours before using or moving the light.

How to Install the Wheel Kit:

1. Lay the light down on a soft surface like a towel or blanket.

2. Remove the rubber feet using a credit card or similar tool.

3. Clean all four corners of the base using the included alcohol wipes. Let dry completely.

4. Apply the cord clip: Place it parallel to the base, guiding the cord through the center. Secure it in place.

5. Position the wheels:

   • Use the locking wheels diagonally across from each other (front left and back right, or vice versa).

   • Place the regular wheels in the other two corners to form an X-pattern.

6. Stick the wheels: Remove the adhesive backing, align each wheel just inside the corner edges, and press down firmly.

7. Let it cure: Leave the light upright and stationary for 24 hours before rolling or using.

Safety & Usage Tips:

• Always lock the wheels during use to prevent unwanted movement.

• Keep the cord clipped securely while moving the light to avoid tangling or damage.

• Unclip the cord when adjusting the height and reclip afterward.

• Avoid forcing the light under tight spaces or leaning it—this can damage the adhesive.

• Leave the light untouched for at least 24 hours after installation so the adhesive can fully cure.

• Using the light before curing is complete can cause the wheels to detach and create a safety hazard.

If a wheel comes off or you need new adhesive, please contact our support team so we can assist you. 

Click Here watch our installation tutorial for a step-by-step visual guide!